Bär Cargolift Falt
The tuck-away lift
Do you often require free access to the doors, such as when loading and unloading on a ramp? Would a standard platform be disruptive in vehicle use? Then Bär Cargolift Falt is your solution for loading tasks.
In driving position the Bär Cargolift Falt folds down under the vehicle floor. This enables non-restrictive ramp loading. If the Cargolift is needed, the command “lower” sets up the platform package mechanically, so that the user can then unfold it manually. The folding process is thereby facilitated with a spring assistance.
With frequent loading and unloading on a hillside, BÄR recommends version F4: While F2 Cargolifts only have two lifting cylinders, the two additional tilting cylinders of the F4 Cargolift enable tilting adjustment at any height. This increases safety and comfort when loading.
This product groups includes the Cargolifts:
- BC 1000 F2
- BC 1000 F4
- BC 1500 F2
- BC 1500 F4
- BC 2000 F2
- BC 2000 F4
Equipment for Bär Cargolift Falt
The standard control unit Bär Control EVO
Intuitively usable, robustly built and perfectly operable even with gloves thanks to the cross lever switches - that is the Bär Control EVO operating unit. Optionally, the Cargolift can be switched on and off using the left control lever. BÄR calls this option SwitchKey.
Learn more
Simple and safe radio control - Bär SmartControl Basic
BÄR offers the Bär SmartControl Basic radio remote control for operating the basic functions by radio. Because three control buttons are enough! The safety comes from the close-range detection.
The foldable aluminium platform
All folding Cargolifts are equipped with a lightweight yet stable aluminium platform. Manual folding is user-friendly with spring relief. The rear of the platform is natural aluminium as standard. The anti-slip TracGrip platform tread increases safety on the platform. Alternatively, the noise-reducing tread SilentGrip is available.
For the safe transport of your roll containers - trolley stop 2rd
The trolley stp 2rd enables the simultaneous transport of two roll containers. The flaps have an opening angle of 43° for roll diameters up to 110 mm. The flaps open individually with one operating lever per flap and have two switching positions.
Operating film for trolley stop 2rd on YouTube
For the safe transport of your roll containers - trolley stop 2ad
The trolley stp 2ad enables the simultaneous transport of two roll containers. The flaps have an opening angle of 110° for roll diameters up to 200 mm. The flaps open individually with one operating lever per flap and have two switching positions.
Operating film for trolley stop 2ad on YouTube
Further content on Bär Cargolift Falt
Use the data of your Bär Cargolift!
All Bär Cargolifts are equipped with the Bär CargoConnect data interface. If the software option is active and the electronic control unit eBC Controller is connected to your telematics, you can use the data.
Product finder MyCargolift - Find the suitable tail lift here!
You know your vehicle and your transport task - find the suitable tail lift for it! Because the product recommendation MyCargolift determines the suitable Bär Cargolift on the basis of five pieces of information. Try it out directly!
The serial number-specific instruction manual HowToCargoLift
Driver qualification is a key factor in professional distribution transport. At the same time, technology is constantly evolving. That's why BÄR offers you the online driver training HowToCargoLift. After entering the serial number (or scanning the QR code on the Bär Cargolift), you will receive a short instruction manual of exactly that Cargolift - available in eleven languages.