
Manoeuvring with the truck and Standard Cargolift at the ramp requires extensive practice - or the Bär SmartControl CabinControl. Together with two rear drive cameras and a monitor in the cabin, you can operate and bring the Cargolift perfectly into position - if desired with orientation lines on the monitor (patented).
In addition, the Bär SmartControl CabinControl is a combined cab and radio remote control. The Bär SmartControl Plus handheld transmitter can therefore also be used as a radio remote control - see Bär SmartControl »
The Bär SmartControl CabinControl offers you when used with Bär Cargolift Standard S4...
- ...QuickShift function as standard for simultaneous opening and lowering of the platform directly after switching on.
- Following QuickShift, an automatic stop is possible for driving underneath the ramp.
- Orientation lines on the monitor make it easier to place the platform on the ramp.

The Bär SmartControl CabinControl consists of: Bär SmartControl Plus with docking station », two rear view cameras at the rear of the vehicle and a split screen monitor in the driver's cab. The rear view camera system with monitor is not part of the scope of delivery of CabinControl.
The Bär SmartControl CabinControl system saves time and nerves by enabling Cargolift operation from the cab with full visibility - so that logistics processes can run without interruption and the weather doesn't matter!
Please find the complete operating manual in the documents for your serial number available in the Bär Cargolift WebShop »

Safety First! With this requirement the assistance system Bär VisionAssist is relevant for you: When operating the Cargolift, an AI rear view camera monitors the previously defined movement radius of the platform. If a person enters it, the operating command is immediately stopped automatically. The dangerous situation is directly displayed to the driver on the monitor in the driver's cab. After the automatic stop and the check of the hazardous situation, the driver can continue the operation. Together with the Bär SmartControl cab control, further turning systems according to R158 can also be integrated.