Bär Cargolift - Lifting Performance.

Simon Loos trusts in the powerfull BC 2500 R4C

Already since 1938 Simon Loos works as professional service provider in logistics in BeNeLux. The family business provides in the third generation packages for complete logistics – from warehousing by logistics to consulting. A continuous improvement of the logistic performance is the major focus. For example with the BC 2500 R4C.

As one of the youngest RetFalt Cargolifts the BC 2500 R4C is prepared in the best way for semi-trailers with moving rear axle – thanks to its compact dimensions! In addition it is a powerful companion with a load moment of 25 kNm. On its aluminium platform there is enough space for two pallets with pallet truck or for trolleys that can be loaded and unloaded securely with the trolley stop 2Rx.

As a single folded retractable taillift the platform can be slided out hydraulically by the control box in order to be unfolded manually afterwards. A torsion spring facilitates this procedure. Instead of the foot control Simon Loos uses a cable remote control fitted inside the vehicle body. The user finds an assigned position marked in yellow on the platform for a secure position in use. The blue SilentGrip underneath reduces noise during the taillift operation. For loading and unloading from the pavement a side loading ramp is available.

Bär Cargolift – Lifting Performance.

Simon Loos

The daily performance of BC 2500 R4C

In two working shifts there is load or unloaded with the Cargolift:

  • 30 trolleys (weight 300-400 kg) or
  • Pallets (weight 800-1.200 kg) and
  • Pallet truck (weight 600 kg)
  • Driver (weight 80 kg)
BC 2500 R4C 

Technical data:

  • Load capacity: 2.500 kg
  • Load centre: 1.000 mm
  • Load moment: 25 kNm
  • Platform: 1.860 mm x 2.520 mm

Further information on Bär Cargolift RetFalt »

Bär Cargolift is one of the largest manufacturers of taillifts in Europe. Bär offers Cargolifts for all applications and vehicle categories with working loads from 500 to 3000 kilograms: Standard / Cantilever tail lifts, single or double folded retractable tail gates and the Bär FreeAccess VanLift. All products are manufactured in-house at the company's main facility in Heilbronn, Germany, where the first Bär taillift was designed and manufactured by Gerd Bär over 40 years ago.

Show cookie popup